静电除尘器用瓷绝缘子专家

 

 

振打瓷转轴95磁转轴绝缘瓷磁套95瓷转轴绝缘瓷套筒95瓷振打棒锥形绝缘轴T501-2高分子振打棒电除雾石英管电除尘石英管陶瓷重锤石英穿墙套管石英盖板锥形石英管电除尘工业电瓷承重瓷瓶95瓷穿墙套管95瓷拉杆石英瓷限位开关A1011压力开关A39855瓷转轴95瓷套筒95瓷支柱95瓷振打棒锥形绝缘轴承压绝缘子宣化电瓷高压瓷缸电除雾石英管电除尘锥形石英管电晕丝线陶瓷重锤电瓷转轴电瓷套筒振打瓷轴石英穿墙套管铜川电瓷厂铁塔电瓷绝缘子阴极悬挂瓷瓶阴极吊挂瓷瓶电除尘高压瓷瓶阴极振打瓷转轴振打瓷轴湿式电除尘95瓷防露防腐型绝缘拉棒杆JFL-072/100DJLG620-650JF66-650-J

铜川电瓷电磁材料永远纯净铁塔电瓷制造有限责任公司 

(铜川铜川瓷瓶特种陶瓷制造商)铁塔电磁制造有限责任公司铜川瓷套铜川瓷转轴铜川承压绝缘子铜川电瓷厂家

铁塔电瓷

13571577004

Iron Tower Electric Porcelain Manufacturing Co., Ltd

TIETA

®

    • 服务热线 Service hotline

    • 0086 13571577004
    • 服务时间

    • 周一至周五 9:00-18:00
    • 微信咨询 WeChat consultation

Expert in ceramic insulators for electrostatic precipitators

铜川电瓷tieta牌铁塔湿电除尘承压绝缘子瓷转轴绝缘瓷套石英管绝缘拉棒瓷拉杆绝缘轴支撑承重高压瓷瓶

铜川电瓷厂塔式承重瓷柱,电瓷支柱,棒型瓷立柱,支撑50瓷,60瓷,75瓷,85瓷,95瓷,99瓷加热棒瓷瓶加热杆中12*350,300W/220V单头螺纹电除尘瓷套绝缘子阴极悬挂瓷瓶绝缘体型号规格6Y4SS1支撑瓷瓶绝缘体型号规格JH-120/500DII-9 Φ487*Φ264*h700材质95瓷 瓷轴JZ3-520 φ65 L=520mm\电袋复除尘器\8FSQ-90 除尘器瓷套3352瓷转轴

 

50瓷塔式承重瓷柱

静电除尘器瓷柱用于静电除尘器支撑悬挂电晕极悬挂框架,起支撑和高压绝缘作用,瓷柱绝缘子适用于工作温度不超过250℃、直流工作电压72KV~120KV,安装地点海拔高度不超过1000米的工作条件下使用。
瓷柱绝缘子严格按照GB/T772-2005《高压绝缘子瓷件技术条件》和JB/T6746.3-93《电除尘器用瓷绝缘子》制造。绝缘子由瓷件和上下金属附近用耐高温胶合剂胶装而成,瓷件端面与金属附近胶装接触部分垫有耐高温弹性衬垫,瓷件胶装部位采用滚花,上砂等结构,防止松动,扭转,以保证机械强度。瓷件表面施白色或棕色瓷釉,金属表面涂高温油漆。
注:不同瓷质等级的瓷件耐温≤250℃、≤350℃、≤500℃、环境中使用,工作电压为72-120KV,抗压破坏负荷不低于300KN。
使用各种瓷瓶绝缘子产品时必须安装平整受力均匀,运行设备前先给瓷瓶及安装位置加热烘干12-24小时左右(保证瓷瓶及安装位置清洁干燥,不能有油污等潮湿现象,检查电压是否符合要求)才能运行设备),突然升温降温会导致温差引起瓷瓶炸裂。

 

Electrostatic precipitator porcelain columns are used for electrostatic precipitator support and suspension of corona electrode suspension frames, serving as support and high-voltage insulation. Porcelain column insulators are suitable for use under operating conditions where the operating temperature does not exceed 250 ℃, the DC operating voltage is 72KV to 120KV, and the installation site is located at an altitude of not more than 1000m.
Porcelain post insulators are manufactured in strict accordance with GB/T772-2005 "Technical Conditions for High Voltage Insulators and Porcelain Insulators for Electrostatic Precipitators" (JB/T6746.3-93). Insulators are made of porcelain pieces and the vicinity of the upper and lower metal using high-temperature resistant adhesive. The contact part between the end face of the porcelain piece and the vicinity of the metal is padded with high-temperature resistant elastic pads. The bonding part of the porcelain piece adopts knurled, sanded, and other structures to prevent loosening and twisting to ensure mechanical strength. The surface of porcelain parts shall be painted with white or brown enamel, and the metal surface shall be painted with high-temperature paint.
Note: Porcelain parts of different porcelain grades have a temperature resistance of ≤ 250 ℃, ≤ 350 ℃, ≤ 500 ℃, and are used in the environment. The working voltage is 72-120KV, and the compressive damage load is not less than 300KN.
When using various porcelain insulator products, it is necessary to install them smoothly and evenly under uniform stress. Before operating the equipment, heat and dry the porcelain bottle and installation location for about 12-24 hours (ensure that the porcelain bottle and installation location are clean and dry, free of moisture such as oil stains, and check whether the voltage meets the requirements) before operating the equipment. Sudden temperature rise and drop can cause the porcelain bottle to explode due to temperature differences.

 

塔式瓷柱(直流电压72-130KV)可按需方尺寸定制
Tower type porcelain column (DC voltage 72-130KV)Can be customized according to the size of the buyer
T7-312 YP,T7-322 YP,T7-332 YP,T7-342 YP,T7-372 YP,T7A-372 YP,T7-382 YP,T7C-382 YP,T8-392 YP,T7-402 YP,T8-412 YP,T8-422 YP,T8-452 YP,T7-462 YP,T7-472 YP,T7-492 YP,T8-51F-M YP,T8-51P-M YP,T8-51F-T YP,T8-51P-T YP,T8-40F-M YP,T8-40P-M YP,T8-40F-T YP,T8-40P-T YP

铜川电瓷厂塔式承重瓷柱,电瓷支柱,棒型瓷立柱,支撑50瓷,60瓷,75瓷,85瓷,95瓷,99瓷加热棒瓷瓶加热杆中12*350,300W/220V单头螺纹电除尘瓷套绝缘子阴极悬挂瓷瓶绝缘体型号规格6Y4SS1支撑瓷瓶绝缘体型号规格JH-120/500DII-9 Φ487*Φ264*h700材质95瓷 瓷轴JZ3-520 φ65 L=520mm\电袋复除尘器\8FSQ-90 除尘器瓷套3352瓷转轴50瓷支柱7231,50瓷支柱7238,50瓷支柱7238-C,50瓷支柱7249,50瓷支柱2601,电瓷支柱2603,电瓷支柱T515-3,电瓷支柱2609,电瓷支柱2607,瓷支柱T515-38,瓷支柱2615,电瓷支柱H475,